Where to Put Your Machine
77
7
Environments to avoid
• Locations exposed to direct sunlight or other sources of strong light (more
than 1,500 lux).
• Locations directly exposed to cool air from an air conditioner or heated air
from a heater. (Sudden temperature changes can cause condensation to form
inside the machine.)
• Locations close to machines generating ammonia, such as a diazo copy machine.
• Places where the machine will be subject to frequent strong vibration.
•Dusty areas.
• Areas with corrosive gases.
Access to the machine
Place the machine near the power source, providing the clearance areas shown.
❖ Clearance required for the machine only
1. Rear: 60 cm (23.6") or more
2. Right: 60 cm (23.6") or more
3. Front: 100 cm (39.4") or more
4. Left: 60 cm (23.6") or more
❖ Clearance required for the machine and the optional folding finisher
1. Rear: 100 cm (39.4") or more
2. Right: 80 cm (31.5") or more
3. Front: 100 cm (39.4") or more
4. Left: 80 cm (31.5") or more
ATK019S
ATK020S
To Next Page
Loading...
