Appendix
126
4
When Using Network Utility
If the machine is connected to a network, observe the following points when set-
ting up the machine or changing settings:
For more details, see the operating instructions and Help for ScanRouter V2 Pro-
fessional and DeskTopBinder Lite/Professional.
❖ When a dial-up router is connected in a network environment
The settings for the delivery server to be connected must be made appropri-
ately for the machine with ScanRouter V2 Professional, Auto Document Link,
or DeskTopBinder Lite/Professional. In addition, set up connected devices
using the I/O settings of ScanRouter V2 Administration Utility.
If the network environment changes, make the necessary changes for the de-
livery server using the machine, the administration utility of client comput-
ers, Auto Document Link, and DeskTopBinder Lite/Professional. Also, set
the correct information for the connected devices using the I/O settings of
ScanRouter V2 Administration Utility.
Important
❒ If the machine is set up to connect to the delivery server via a dial-up router,
the router will dial and go online whenever a connection to the delivery
server is made. Telephone charges may be incurred.
❖ When connected to a computer that uses dial-up access
• Do not install ScanRouter V2 Professional on a computer which uses dial-up
access.
• When using ScanRouter V2 Professional, DeskTopBinder Lite/Profession-
al, Auto Document Link, or a TWAIN driver on a computer with dial-up
access, a dial-up connection may be performed when connecting to the de-
livery server and other equipment, depending on the setup. If the compu-
ter is set up to connect to the Internet automatically, the confirmation
dialog box will not appear, and telephone charges may be incurred with-
out your being aware of it. To prevent unnecessary connections, the com-
puter should be set up so the confirmation dialog box always appears
before establishing a connection. Do not make unnecessary connections
when using the above listed software.
To Next Page
Loading...
