Monitoring and Configuring the Printer
56
2
A Open a Web browser, and then enter “http://(machine's address)/” in the
address bar.
Top Page of Web Image Monitor appears.
When setting SSL, a protocol for encrypted communication, under environment
which server authentication is issued , enter “https://(machine's address)/”.
B Click [Login] on Top Page of Web Image Monitor.
The window for entering the login user name and password appears.
C Enter the login user name and password, and then click Login.
For details about the login user name and password, consult your network
administrator.
D In the menu area, click [Configuration].
E Click [E-mail] on the [Device Settings] area.
F Make the following settings:
• Administrator E-mail Address: Make the address settings for receiving e-
mail notification when there is a problem with the machine or consumables
need replacing.
• Items in the Reception column: Make the necessary settings for sending
and receiving e-mail.
• Items in the SMTP column: Configure the SMTP server. Check your mailing
environment, and then specify the necessary items. You can also perform
mail authentication for the SMTP server.
• Items in the POP before SMTP column: Configure the POP server. Check
your mailing environment, and then specify the necessary items. You can
also perform mail authentication for the POP server.
• Items in the POP3/IMAP4 column: Configure the POP3 or IMAP4 server.
Check your mailing environment, and then specify the necessary items.
• Items in the E-mail Communication Port column: Configure the port to be
used for access to the mail server.
• Items in the E-mail Notification Account column: Items in the E-Mail Noti-
fication Account column: Specify these items if you want to use on-demand
e-mail notification.
G Click [OK].
H Click [Logout].
I Quit Web Image Monitor.
Note
❒ For details about the login user name and password, see Security Reference.
To Next Page
Loading...
