Printing a Document
57
3
Note
❒ Press [Stop] to cancel printing.
❒ When printing finishes, the stored file is deleted.
❒ To cancel printing, press [Exit]. Then, press [Job Reset]. After it has started,
the file is deleted.
❒ If there is a print job outstanding, this is printed before the sample print job.
Deleting a Sample Print File
If a printed document is not as required, you can delete the Sample Print file.
A On the machine's control panel, press the {Printer} key to display the printer
screen.
B Press [Print Jobs].
A list of print files stored in the machine appears.
C Press [Stored Print Job List].
A list of sample print files stored in the machine appears.
D Select the file you want to delete by pressing it.
To cancel a selection, press the highlighted jobs again.
Only one file can be selected at a time.
E Press [Delete].
A confirmation screen appears.
F Press [Yes] to delete the file.
After the file is deleted the printer screen reappears.
Press [No] to cancel the delete request.
To Next Page
Loading...
