Copier / Document Server Features
90
3
Page Numbering
This section describes the user tools in the Page Numbering menu under Stamp.
❖ Stamp Format
You can select the page number format given priority when [Page Numbering]
is pressed.
The default setting is P1,P2....
❖ Font
You can select the page number printed in Page Numbering mode.
The default setting is Font 1.
❖ Size
You can set the size of the stamp printed in Page Numbering mode.
The default setting is Auto.
❖ Page Numbering in Combine
You can set page numbering when using the Combine function and the Page
Numbering function together.
The default setting is Per Original.
❖ Stamp Position
Specify how each of stamp is printed.
•Stamp Position
Specify where to print the stamp.
•Stamp Position
You can adjust the position of the stamp within the available ranges shown
below.
Metric version:
"Top Left"…T/B: 4-407mm, L/R: 4-407mm
"Top Center"…T/B: 4-407mm, L/R: 203-203mm
"Top Right"…T/B: 4-407mm, L/R: 4-407mm
"Bottom Left"…T/B: 4-407mm, L/R: 4-407mm
"Bottom Center"…T/B: 4-407mm, L/R: 203-203mm
"Bottom Right"…T/B: 4-407mm, L/R: 4-407mm
Inch version:
"Top Left"…T/B: 0.1"-16.0", L/R: 0.1"-16.0"
"Top Center"…T/B: 0.1"-16.0", L/R: 8.0"-8.0"
"Top Right"…T/B: 0.1"-16.0", L/R: 0.1"-16.0"
"Bottom Left"…T/B: 0.1"-16.0", L/R: 0.1"-16.0"
"Bottom Center"…T/B: 0.1"-16.0", L/R: 8.0"-8.0"
"Bottom Right"…T/B: 0.1"-16.0", L/R: 0.1"-16.0"
To Next Page
Loading...
