Registering Addresses and Users for Scanner Functions
132
6
E-mail Destination
This section describes the procedure for registering, changing, and deleting E-
mail Destination.
Register e-mail destinations so you do not need to enter an e-mail address every
time, and can send scan files from scanner function by e-mail.
• It is easy to select the e-mail destination if you register “Name" and “Key Dis-
play" as the e-mail destination.
• You can register e-mail destinations as a group.
• You can use the e-mail address as the sender's address when sending scan
files in scanner mode. If you want to do this, set a protection code on the send-
er address to prevent unauthorized access.
Note
❒ You can select an e-mail address from an LDAP server, and then register it in
the Address Book. See “Sending Scan File by E-mail", Scanner Reference.
Reference
p.168 “Registering a Protection Code”
Registering an E-mail Destination
This section describes how to register an e-mail destination.
A Press [System Settings].
B Press [Administrator Tools].
C Press [Address Book Management].
D Check that [Program / Change] is selected.
E Select the name whose e-mail address you want to register. Press the name
key, or enter the registered number using the number keys.
If you press [Search], you can search by the registered name, user code, folder
name, or e-mail address.
To Next Page
Loading...
