27
3. Troubleshooting When
Using the Printer Function
This chapter explains likely causes of and possible solutions for printer function
problems.
When a Message Appears During
Installation of the Printer Driver
This section explains what to do if a message appears when installing the printer
driver.
Message number 58 or 34 indicates that the printer driver cannot be installed us-
ing Auto Run. Install the printer driver using [Add Printer] or [Install Printer].
Message number 58 appears if there is a newer version of the printer driver al-
ready installed.
Windows 95/98/Me, Windows 2000, or Windows NT 4.0
This section explains the procedure under Windows 95/98/Me, Windows 2000,
or Windows NT 4.0.
A On the [Start] menu, point to [Settings], and then click [Printers].
B Double-click the [Add Printer] icon.
C Follow the instructions in [Add Printer Wizard].
If the printer driver is on a CD-ROM, the location of the RPCS printer driver
is either \DRIVERS\RPCS\WIN9X_ME, or \DRIVERS\RPCS\WIN2K_XP.
If the installer starts, click [Cancel] to quit.
D Specify a port.
For the setting procedure, see a description for the port you are using.
Note
❒ Available ports vary according to your Windows operating system or the
type of interface. For details, see “Preparing the Machine”, Printer Reference.
Reference
“Preparing the Machine”, Printer Reference
To Next Page
Loading...
