Ricoh Aficio MP W3600 - Changing the Paper Size in the Cut Paper Tray

Changing the Paper Size
63
5
Changing the Paper Size in the Cut Paper Tray
The following procedure explains how to change a paper size in the cut paper
tray.
Note
❒ This procedure is required for loading A3K, B4 JISK, 11" × 17"K, or 12" × 18"K
size paper.
❒ If you want to load A4K, 8
1
/
2
" × 11"K paper sizes, see “Loading Cut Paper”.
❒ When you change the paper size or paper type, make the paper size or type
settings under System Settings. See “Tray Paper Settings”, General Settings
Guide.
❒ Fan the paper before loading.
❒ Straighten curled or warped paper before loading.
Reference
p.60 “Loading Cut Paper”
“Tray Paper Settings”, General Settings Guide
ATK007S