Enhanced Network Security
134
5
Specifying Network Security Level
This can be specified by the network administrator.
This setting lets you change the security level to limit unauthorized access.
Set the security level to [Level 0], [Level 1], or [Level 2].
Select [Level 2] for maximum security to protect confidential information.
Select [Level 1] for moderate security. Use this setting if the machine is connected
to the office local area network (LAN).
Select [Level 0] to use this setting if no information needs to be protected.
You can specify the entire network security level setting the machine’s control
panel.
Reference
For details about logging on and logging off with user authentication, see p.25
“Logging on Using Administrator Authentication”, p.28 “Logging off Using
Administrator Authentication”.
A Press the {User Tools/Counter}key.
B Press [System Settings].
C Press [Administrator Tools].
To Next Page
Loading...
