Ricoh aficio MP W3601 - Page 173

Parameter Value configured
Username "character string" You can specify the login user name for the
Radius server.
Usable characters: ASCII 0x20-0x7e (31
bytes).
The default is blank.
Username2 "character string" You can specify the phase 2 username for EAP-
TTLS/PEAP phase 2 authentication.
Usable characters: ASCII 0x20-0x7e (31
bytes).
The default is blank.
domain "character string" You can specify the login domain name for the
Radius server.
The characters you can enter are ASCII
0x20-0x7e (64 bytes), but not "@" or "\".
The default is blank.
password "character string" You can specify the login password for the
Radius server.
Usable characters: ASCII 0x20-0x7e (128
bytes). The default is blank.
srvcert {on|off} You can set the server certificate.
The default is "off".
imca {on|off} You can enable or disable the certificate when
the intermediate certificate authority is present.
The default is "off".
srvid "character string" You can set the server ID and sub domain of the
certificate server.
Usable characters: ASCII 0x20-0x7e (128
bytes). The default is blank.
sub domain {on|off} You can specify whether or not to permit access
to the machine by users in subdomains use.
The default is "off".
Remote Maintenance Using telnet
171
4