Message Problem and solutions
cipher suite mismatch The uni-cast / multi-cast suite (TKIP/AES/WEP) of
the access point is different from the suite used by
the supplicant.
client EAP method rejected The authentication mode of the access point is
different with the authentication mode of the
supplicant.
Use the same authentication mode between the
access point and the supplicant.
Client password rejected The client's password was rejected. Check the client
password.
Client TLS certificate rejected The client's TLS certificate was rejected. Check the
certificate.
connected DHCP server <DHCP server address> The IP address was successfully received from the
DHCP server.
connected DHCPv6 server <IPv6 address> The IP address was successfully received from the
DHCPv6 server.
connecting The supplicant is establishing a Wireless LAN
connection with the access point.
Could not attach to FileServer <error number> Connection to the file server could not be
established when the remote printer went online.
The file server refused the connection for unknown
reason. Check the file server's configuration.
Could not attach to PServer <print server> Connection to the print server has not been
established when the remote printer is turned on.
The print server has refused the connection. Check
the print server configuration.
connection from <IP address> A user logged in from the host <IP address>.
Current Interface Speed: xxx Mbps Speed of the network (10Mbps, 100 Mbps, or
1Gbps).
Current IP address (<current IP address>) The IP address <current IP address> was acquired
from the DHCP server.
Current IPX address <IPX address> The current IP address is <IPX address>.
4. Monitoring and Configuring the Machine
188
To Next Page
Loading...
