Paper Transport
• Turn off the main power switch and disconnect the power cord before you start any of the
procedures in this section. (page 33 "General Cautions")
Exit / Switchback Sensor
1. Upper Cover (page 43 "Upper Cover")
2. Exit / Switchback Sensor [A] (Hook, x 1)
Duplex Entrance Sensor
1. PSU (page 93 "PSU")
2. Duplex Clutch (page 65 "Duplex Clutch")
3. Open the duplex exit guide plate [A].
4. Remove screws circled in the picture below ( x 5).
[A] Duplex exit guide unit
4. Replacement and Adjustment
86
To Next Page
Loading...
