System Service Mode
D115/D116 3-62 SM Appendix
Selects the WEP key.
042
Fragment Thresh CTL
[256 to 2346 / 2346 / 1]
Adjusts the fragment threshold for the IEEE802.11 card.
This SP is displayed only when the IEEE802.11 card is installed.
043
11g CTS to Self CTL
[0 to 1 / 1 / 1] 0: Off, 1: On
Determines whether the CTS self function is turned on or off.
This SP is displayed only when the IEEE802.11 card is installed.
044
11g Slot Time CTL
[0 to 1 / 1 / 1] 0: 20
m, 1: 9 m
Selects the slot time for IEEE802.11.
045
WPA Debug Lyl CTL
[0 to 3 / 3 / 1]
1: Info, 2: Warning, 3: Error
Selects the debug log for WPA authentication application.
This SP is displayed only when the IEEE802.11 card is installed.
5842 GWWS Analysis DFU
001
Setting 1 CTL
This is a debugging tool. It sets
the debugging output mode of
each Net File process.
Default: Bit SW 1000 0000
Bit Groups
0 System & other groups (LSB)
1 Capture related
2 Certification related
3 Address book related
4 Machine management related
5 Output related (printing, delivery)
6 Repository related
7 Debug log output
To Next Page
Loading...
