System Service Mode
SM Appendix 3-63 D115/D116
Appendix:
SP Mode
Tables
002
Setting 2 CTL
Default: Bit SW 0000 0000
Bit Groups
0-6 Not used
7
Log time stamp setting
0: Date/Hour/Minute/Second
1: Minute/Second/Msecond
5844
USB
001
Transfer Rate CTL
Sets the speed for USB data transmission.
[Full Speed]
[Auto Change]
002
Vendor ID CTL
Sets the vendor ID:
Initial Setting: 0x05A Ricoh Company
[0x0000 to 0xFFFF/1] DFU
003
Product ID CTL
Sets the product ID.
[0x0000 to 0xFFFF/1] DFU
004
Device Release No. CTL
Sets the device release number of the BCD (binary coded decimal) display.
[0000 to 9999/1] DFU
Enter as a decimal number. NCS converts the number to hexadecimal number
recognized as the BCD.
To Next Page
Loading...
