System Service Mode
D115/D116 3-64 SM Appendix
5845
Delivery Server Setting CTL -
Provides items for delivery server settings.
001
FTP Port Num
[ 0 to 65535 / 3670 / 1 /step]
Sets the FTP port number used when image files to the Scan Router Server.
002
Srv IP (Primary)
Range: 000.000.000.000 to 255.255.255.255
Use this SP to set the Scan Router Server address. The IP address under the
transfer tab can be referenced by the initial system setting.
003
Retry Interval
[60 to 999 / 300 / 1 second /step]
Specifies the interval time for sending the scanned image data to the deliver
server or SMTP/FTP/NCP/SMB server after sending error.
004
No. of Retries
[0 to 99 / 3 / 1 time/step]
Specifies the retry times for sending the scanned image data to the deliver
server or SMTP/FTP/NCP/SMB server after sending error.
006
DeliErr DispTime
[0 to 999 / 300 / 1 second /step]
Use this setting to determine the length of time the prompt message is
displayed when a test error occurs during document transfer with the NetFile
application and an external device.
008
Svr IP (Secondary)
Range: 000.000.000.000 to 255.255.255.255
Specifies the IP address assigned to the computer designated to function as
the secondary delivery server of Scan Router. This SP allows only the setting
of the IP address without reference to the DNS setting.
009
Deli Svr Model
[0 to 4 / 0 / 1 /step]
Allows changing the model of the delivery server registered by the I/O device.
0: Unknown, 1: SG1 Provided, 2: SG1 Package,
3: SG2 Provided, 4: SG2 Package
To Next Page
Loading...
