SP5xxx: Mode
SM 5-97 D017/D018/D019/D020
Service
Tables
Controls if permission is given to get access to the SOAP method over Port
80 on the NRS network.
[0 to 1/1]
0: No. Access denied
1: Yes. Access granted.
RCG – C Registed
21
This SP displays the Cumin installation end flag.
1: Installation completed
2: Installation not completed
RCG – C Registed Detail
22
This SP displays the Cumin installation status.
0: Basil not registered
1: Basil registered
2: Device registered
Connect Type (N/M)
23
This SP displays and selects the Cumin connection method.
0: Internet connection
1: Dial-up connection
Cert. Expire Timing DFU
61
Proximity of the expiration of the certification.
Use Proxy
62
This SP setting determines if the proxy server is used when the machine
communicates with the service center.
HTTP Proxy Host
063
This SP sets the address of the proxy server used for communication
between embedded RCG-N and the gateway. Use this SP to set up or
display the customer proxy server address. The address is necessary to set
up embedded RCG-N.
Note: The address display is limited to 128 characters. Characters beyond
To Next Page
Loading...
