BRIDGE UNIT DRIVE MOTOR REPLACEMENT
SM 7 D368
Bridge Unit
BU3020
D368
3. REPLACEMENT AND ADJUSTMENT
NOTE: When taking apart the bridge unit, first take the unit out of the copier.
3.1 BRIDGE UNIT DRIVE MOTOR REPLACEMENT
1. Remove the bridge unit from the copier. (See the Installation Procedure in the
base copier manual.)
2. Remove the rear cover [C] (2 screws).
3. Remove the bridge unit drive motor [D] (2 screws, 1 connector).
B417R103.WMF
[D]
[C]
To Next Page
Loading...
