1. Screen
Shows the number of copies and the error code.
2. [Number of copies] Key
Use this button to change the number of copies.
3. Density Screen
Displays the copy density in three levels.
The print density is indicated by which segment is lit on this indicator.
• Left: Lighter than normal
• Middle: Normal density
• Right: Darker than normal
4. [Density] Key
Use this button to adjust the copy density.
5. [ID Card Copy] Key
Use this button to perform an ID copy.
6. [Clear/Stop] Key
When the machine is online, press this key to cancel an ongoing print job.
Guide to Components
9
To Next Page
Loading...
