Specifying the Original Type
Use this procedure to specify the original type for the current job from Smart Organizing Monitor.
The procedure in this section is an example based on the Windows 7 OS. The actual procedure may
vary depending on the operating system you are using.
1. On the [Start] menu, click [All Programs].
2. Click [Smart Organizing Monitor for SP 100 Series].
3. Click [Smart Organizing Monitor for SP 100 Series Status].
4. On the [User Tool] tab, click [Printer Configuration].
5. On the [Copy] tab, select the document type in the [Document Type:] list.
6. Click [OK].
7. Click [Close].
4. Copying Originals
38
To Next Page
Loading...
