• Setting this function for the current job temporarily disables combined copying automatically.
However, after the temporary job setting is cleared, the combined copying will be enabled again
automatically.
•
Temporary job settings are cleared in the following cases:
• When no input is received for the period of time specified in [System Auto Reset Timer] while
the initial screen is displayed. For details, see page 166 "Administrator Settings".
• When the [Clear/Stop] key is pressed while the initial screen is displayed.
• When the machine's mode is changed.
• When the power is turned off.
• When the machine's default for the same setting is changed.
Copying Both Sides of an ID Card onto One Side of Paper
77
To Next Page
Loading...
