Ricoh Aficio SP 3510SF - Page 94

CMC039
• Fan envelopes, and then align their edges before loading.
CMC040
• When fanning envelopes, make sure they are not stuck together. If they are stuck together,
separate them.
• When fanning envelopes, make sure the envelope flaps are not stuck together. If they are stuck
together, separate them.
• Before loading envelopes, flatten them out so that their curl does not exceed that shown in the
illustration below.
5 mm
0 mm
CMC041
• If the curl is severe, flatten out the envelopes using your fingers, as shown in the illustration below.
2. Getting Started
92