Supplementary Specifications
115
5
❖ Booklet/Magazine
• The machine sets the reproduction ratio automatically to meet the paper
size and copies the originals together onto the paper.
• The machine selects reproduction ratios of between 25 – 400% (25–200%
when placing originals in the ADF).
• If the calculated ratio is under the minimum ratio, it is automatically ad-
justed to within available range. However, with certain ratios, parts of the
image might not copy.
• If the orientation of originals is different from that of the copy paper, the
machine will automatically rotate the image by 90° to make copies proper-
ly.
• You cannot copy using originals that are different in size and orientation.
• If the number of originals scanned is less than a multiple of 4, the last page
is copied blank.
• When using the Magazine function, copying may take some time after
scanning originals.
❖ Image Repeat
Depending on paper size, ratio, and orientation, parts of repeated images
may not copy.
❖ Centring
Though the original is set to a different orientation from the paper, the ma-
chine will not rotate the image by 90° (Rotated Copy).
❖ Erase
The erased margin width varies depending on the reproduction ratio.
If the size of the original is different to the sizes listed in the following chart,
the erased margin might be shifted:
•Metric version
•Inch version
Original location Paper size and orientation
Exposure glass A3L, B4 JISL, A4KL, B5 JISKL, A5L,
8
1
/
2
" × 14"L, 8
1
/
2
" × 13"L
ADF A3L, B4 JISL, A4KL, B5 JISKL, A5KL,
8
1
/
2
" × 13"L
Original location Paper size and orientation
Exposure glass
11" × 17"L, 8
1
/
2
" × 14"L, 8
1
/
2
" × 11"KL,
10" × 14"L, 8" × 10"L
ADF
11" × 17"L, 8
1
/
2
" × 14"L,8
1
/
2
" × 11"KL,
10" × 14"L, 5
1
/
2
" × 8
1
/
2
"L
To Next Page
Loading...
