Copying
24
2
C Place originals, and then press the
{Start} key.
Note
❒ The maximum limit for stacking
special paper is different to that
for plain paper. See "BLoading
Paper", General Settings Guide.
❒ When setting OHP transparen-
cies, thin paper, or adhesive la-
bel paper, Staple, Shift, or Sort
functions cannot be used.
Envelopes
Note
❒ Postcards and envelopes should be fed from paper tray 2 or the bypass tray.
❒ Some kinds of envelopes might cause misfeeds or wrinkle. If this happens,
push down the green lever of the fusing unit. See p.25 “When copying onto
envelopes”.
❒ Envelopes with large flaps should be fed from paper tray 2 to prevent mis-
feeds. See the illustration below.
2
To Next Page
Loading...
