Copying
36
2
A Press [Create Margin] on the initial
display.
B If you do not want to combine it
with the Reduce/Enlarge function,
place originals, and then press the
{Start} key.
Zoom
You can change the reproduction ra-
tio in increments of 1%.
Note
❒ You can select a preset ratio close
to the ratio using [Reduce] or [En-
large], and then adjust it further,
using [n] or [o].
A Press [Reduce / Enlarge].
B Enter the ratio.
To select the ratio using [n] and
[o]
A Select a preset ratio close to the
ratio using [Reduce] or [Enlarge].
B Adjust the ratio further, using
[n] or [o].
Note
❒ Pressing [n] or [o] changes
the ratio in increments of 1%.
Pressing and holding down
[n] or [o] changes it in in-
crements of 10%.
❒ If you have incorrectly the ra-
tio, readjust it using [n ] or
[o].
To enter the ratio using the
number keys
A Press [Mag. Ratio].
B
Enter the ratio using the number
keys.
C Press [#].
D Press [OK].
C Place originals, and then press the
{Start} key.
Auto Reduce/Enlarge
The machine can choose an appropri-
ate reproduction ratio based on the
paper and original sizes you select.
To Next Page
Loading...
