Ricoh B064 - Page 798

SADDLE-STITCH STAPLER REPLACEMENT
SM 9 B468/B469/B674
3000-Sheet
Finisher
B468/B469/
B674
7. Attach the Teflon jigs [A] and [B].
8. Attach the new booklet stapler motor
mount to the frame ( x 4).
9. On each motor, with your finger turn
the brass gear [C] toward you until it
stops then tighten the motor screws
[D] .( x 3)
10. Remove the motor mount board
( x 4) and remove the jigs.
11. Fasten the new motor mount to the
frame ( x 4,  x 2).
B468R104.WMF
B468R105.WMF
[A]
[B]
[C]
[D]