Ricoh B089 - Page 187

TRAY HEATER
SM 3-53 B089/B093
Installation
5. Remove the 2nd paper lift motor [A] ( x 2,  x 1).
6. Route the heater cable [B] to the side of rivet [C] and under bracket [D].
7. Clamp the heater cable [B] as shown.
8. Joint the heater cable and the ac cable [E].
9. Reinstall the paper lift motor [A] and reassemble the machine.
B089I913.WMF
B089I551.WMF
[A]
[B]
[E]
[B]
[C]
[D]