SERVICE PROGRAM MODE
B089/B093 4-40 SM
Output Check 5804
Turns on electrical components individually for test purposes. (! 4.2.5)
5807* Option Connection Check
5807 1 ARDF
5807 2 Paper Tray Unit
5807 3 LCT
5807 4 Finisher (1000-sheet, Two-Tray
finisher)
Checks the connectors to the optional
peripheral devices. Execution will return
either a “1” or “0” on the display.
1: Device connected correctly.
0: Device not connected correctly.
SC Code Reset DFU 5810
Resets all level A service call conditions, such as fusing errors. To clear the
service call, touch “Execute” on the LCD, then turn the main power switch off/on.
5811 Machine No.
Setting
Use to input the machine serial number. (Normally done at
the factory.) DFU
This serial number will be printed on the SMC report
5812* Service Tel. No. Setting
5812 1 Service
Use this to input the telephone number of the service representative (this is
displayed when a service call condition occurs).
Press the key if you need to input a pause (–). Press the (Clear/Stop) key
to delete the telephone number.
5812 2 Facsimile
Use this to input the fax number which will be printed on the user counter report.
Press the key if you need to input a pause (–). Press the (Clear/Stop) key
to delete the telephone number.
5812 3 Supply
Use this to input the telephone number that the customer uses to order toner (this
is displayed in the inquiry menu of UP mode).
Press the key if you need to input a pause (–). Press the (Clear/Stop) key
to delete the telephone number.
5812 4 Operation
Use this to input the telephone number of the sales representative (this is
displayed in the inquiry menu of UP mode).
Press the key if you need to input a pause (–). Press the (Clear/Stop) key
to delete the telephone number.
To Next Page
Loading...
