SERVICE PROGRAM MODE
SM 4-43 B089/B093
Service
Tables
5828* Network Setting
5828 66
Job Spooling Clear:
Start Time
Determines whether unprinted jobs on the HDD are
printed then next time the machine is switched on.
Available only the job spooling feature.
[0~1 / 1 / 1]
0: Clear spooled jobs from HDD at power on.
1: Print spooled jobs on HDD at power on.
Disables and enables protocols used for job
spooling. The settings are done by entering a “0”
(Off) or a “1” for each bit switch. Defaults: 1 (all
enabled).
Bit Protocol Comments
0 LPR
1 FTP Not used
2 IPP
3 SMB
4 BM Links Japan Only
5 Reserved Not used
6 Reserved Not used
5828 69
Job Spooling: Protocol
7 Reserved Not used
5828 74 Delete Password Deletes the NCS password. Sets the Telnet, WSM,
and remote ROM update passwords to NULL (empty)
5828 84 Print Settings List Prints a list of the NCS parameter settings.
5828 90 TELNETs Disables or enables Telnet operation. If this SP is
disabled the Telnet port is closed.
[0~1/ 1 / 1]
0: Disable
1: Enable
5828 91 Web Disables or enables the Web operation.
[0~1/ 1 / 1]
0: Disable
1: Enable
To Next Page
Loading...
