SERVICE PROGRAM MODE
B089/B093 4-44 SM
5832 HDD Formatting
Enter the SP number for the partition to initialize, then press #. When execution
ends, cycle the machine off and on.
5832 1 ALL Initializes entire content of the HDD.
5832 2 IMH Initializes 1) documents stored on the document server, 2)
stamp print data, 3) scanner delivery images, 4) fax delivery
images.
5832 3 Thumbnail Initializes MCS thumbnail images.
5832 4 Job Log Initializes job data used by the Poplar server. Japan Only
5832 5 Printer Fonts Initializes printer fonts, overlay forms.
5832 6 User Info. Initializes user information (UCS)
5832 7 Mail RX Data Initializes mail receive data (DCS)
5832 8 Mail TX data Initializes mail send data (DCS)
5832 9 Data for Design Designer use only.
5832 10 Fax Initializes the logs (fax history and debug log)
5832 11 Ridoc I / F Initializes the NetFile management area.
Job Log Transfer On/Off Setting 5833*
Switches the job log transfer on/off for Poplar server. DFU
0: Off (disable), 1: On (enable)
5834
Operation Panel Image Exposure
Enables and disables the operation panel read (dump) feature. After powering on
the machine, set this option to 1 to enable this feature.
0: Off (disable), 1: On (enable) DFU
To reset the machine to 0, the machine must be turned off and on again. Selecting
0 for this option without cycling the power off and on does not restore the default
setting (0).
To Next Page
Loading...
