SERVICE PROGRAM MODE
SM 4-47 B089/B093
Service
Tables
5840 IEEE 802.11b
SSID Enter ID 5840 4
Enters a unique ID (up to 32 characters long) to identify the device when it is
operating in an area with another wireless LAN network.
Channel MAX JA [1~14/ 14 / 1]
NA [1~11 / 11 / 1
EU [1~13 / 13 / 1]
China, Taiwan (Same as NA)
5840 6
Sets the maximum number of channels available for data transmission via the
wireless LAN. The number of channels available varies according to location. The
default settings are set for the maximum end of the range for each area. Adjust
the upper 4 bits to set the maximum number of channels.
Displayed only when the option 802.11b for wireless LAN is installed.
Channel MIN JA [1~14 / 1 / 1]
NA [1~11 / 1 / 1
EU [1~13 / 1 / 1]
China, Taiwan (Same as NA)
5840 7
Sets the minimum number of channels available for data transmission via the
wireless LAN. The number of channels available varies according to location. The
default settings are set for the minimum end of the range for each area. Adjust the
lower 4 bits to set the minimum number of channels.
Displayed only when the option 802.11b for wireless LAN is installed.
WEP Key Select 00: Key #1
01: Key #2 (Reserved)
10: Key #3 (Reserved)
11: Key #4 (Reserved)
5840 11
Selects the WEP key. [00~11 / 00 / 1 binary]
5840 18* SSID Key Check
Execute to determine whether the value entered for the SSID setting is correct. If
the execution returns “2” the setting is correct. If the returned value is “3”, the
setting is not correct.
WEP Mode 0: Max. 64-bit (10 characters)
1: Max. 128-bit (10, 26 characters)
5840 20
Determines the operation mode of the WEP key.
Displayed only when the option 801.11b for wireless LAN is installed.
To Next Page
Loading...
