SERVICE PROGRAM MODE
B089/B093 4-48 SM
Supply Name Setting 5841
Allows setting the following items with the Soft Keyboard after pressing the “Soft
Keyboard” button displayed for this SP code. The items you enter are displayed
after pressing “User Tools” and then pressing the “Inquiry” button on the touch-
panel display. The items stored in SP 5841-12, 13, and 14 do not appear on the
Inquiry screen.
5841 1 Toner Name Setting: Black Enter the name of the toner in use.
5841 5 Staple Std Enter the name of the staples in use for normal
stapling (not booklet stapling)
5841 7 Org Stamp Enter the name of the original stamp that is
installed in the document feeder. (This is stamped
on originals to indicate that they have scanned.)
5841 11 Staple Std 1 Enter the names of the staples used in the
finisher.
5841 12 Staple Std 2
5841 13 Staple Std 3
5841 14 Staple Std 4
Net File Analysis Mode Setting
[8 bits / 0011 1111 / Bit SW]
5842
Selects each debug output mode for NetFile processing
Bit 8 is reserved. Bit 7 is the debug output switch for each mode.
Net files are jobs to be printed from the document server using a PC and the
DeskTopBinder software
5844 USB
Transfer Rate [0x01~0x04 / 0x04 / 0] 5844 1
Sets the speed for USB data transmission.
0x01: Full Speed (12 Mbps fixed)
0x04: High Speed/Full Speed (480 Mbps/12 Mbps auto adjust)
Vendor ID [0x0000~0xFFFF/ 0x05CA /1], DFU 5844 2
Sets the vendor ID: Initial Setting: 0x05A Ricoh Company.
Product ID [0x0000~0xFFFF/0x0403/1], DFU 5844 3
Sets the product ID.
Device Release Number [0000~9999/0100/1], DFU 5844 4
Sets the device release number of the BCD (binary coded decimal) display.
Enter as a decimal number. NCS converts the number to hexadecimal number
recognized as the BCD.
To Next Page
Loading...
