PRINTER SERVICE MODE
SM 3-1 B577
Printer/
Scanner
B577
3. SERVICE TABLES
3.1 PRINTER SERVICE MODE
Service Table Key
Notation: What it means
[range / default / step]:
Example: [-9 ~ +9 / +3.0 / 0.1 mm step]. The setting can be
adjusted in the range ±9, value reset to +3.0 after an NVRAM
reset, and the value can be changed in 0.1 mm steps with each
key press.
Italics: Comments added for your reference.
*:
This value is stored in NVRAM. After a RAM reset, the default
value (factory setting) is restored.
DFU: Denotes “Design or Factory Use”. Do not change this value.
3.1.2 PRINTER SERVICE MODE TABLES
1001 Bit Switch Settings
Adjusts bit switch settings.
Note: Currently the bit switches are not being used except for Bit Switch 2 bit 3
(See PUB(C)-051 for details).
1003 Clear Setting
1 Initialized Printer System
2 Delete Program DFU
1004 Print Summary
Prints the service summary sheet
(An error log is printed in addition to the configuration page).
1005 Display Version
Displays the version of the controller firmware.
1006 Sample/Locked Print Not Available
⇒
Rev. 10/2003
To Next Page
Loading...
