Ricoh B132 - Postscript3 B761

MFP CONTROLLER OPTIONS
B132/B200 1-138 SM
1.16.12 POSTSCRIPT3 B761
1. Remove the slot cover [A].
2. Put the PostScript3 SD card [B] in SD card slot 2 (middle slot).
Important
• Only one SD card slot is available for applications.
• If the customer wants to use one more application that must go in slot 2
(Printer/Scanner B737, for example), you must copy the contents of the
printer/scanner SD card to the PostScript3 SD card. (%1.16.5)
• The scanner/printer application must be copied to the PostScript3 SD card,
because the PostScript3 SD card cannot be copied for copyright reasons.
• After you copy the printer/scanner SD card, store it behind the door.
(%Pg.1-121) The application SD cards are the property of the customer and
should remain at the site.
B132I909.WMF
[A]
[B]