Ricoh B132 - Ardf; ARDF Side-To-Side and Leading Edge Registration

IMAGE ADJUSTMENTS
B132/B200 3-176 SM
3.19.2 ARDF
ARDF side-to-side and leading edge registration
Make a temporary test chart as shown above using A3/DLT paper.
1. Place the temporary test chart on the ARDF table and make a copy.
2. Check the registration, and adjust using the following SP modes if necessary.
SP Code What It Does Adjustment Range
SP6006 001 ADF Main Reg Adj
± 3.0 mm
SP6006 003 ADF Sub Reg Adj
± 42 steps
SP6006 005 ADF Buck Adj:Front
± 42 steps
SP6006 006 ADF Buck Adj:Back
± 45 steps
SP6006 006 ADF TEdge EMargin
B146R964.WMF
B
A
B146R965.WMF
A
: Leading edge registration
B: Side-to-side registration