Ricoh B132 - Page 503

SERVICE PROGRAM TABLES
SM 5-25 B132/B200
Service Tables
022 Thk2:1C:HS During half-speed copying (paper setting).
[130~200/1 deg.]
023 Thk2:FC:HS During half-speed copying (paper setting).
[130~200/1 deg.]
024 Cont OHP:1C During half-speed copying (paper setting).
[130~200/1 deg.]
025 Cont OHO:FC During half-speed copying (paper setting).
[130~200/1 deg.]
026 OHP:1C:100mm/s During 100 mm/s copying (paper setting).
[130~200/1 deg.]
027 OHP:FC:100mm/s During 100 mm/s copying (paper setting).
[130~200/1 deg.]
PressRoll Pressure Roller
028 Reload Temp Until warmup (reload) ends.
[70~180/1 deg.]
029 Wait Temp:Norm At normal standby temperature.
[50~180/1 deg.]
030 Wait:Temp:Low At low standby temperature.
[50~180/1 deg.]
031 Wait:Temp:High At hight standby temperature.
[50~180/1 deg.]
032 1-S Norm Target temperature.
[70~180/1 deg.]
033 2-S Norm Target temperature.
[70~180/1 deg.]
034 Cont OHP During continuous OHP copying.
[130~200/1 deg.]
035 SemiT OHP:100mm/s Target temperature (paper setting).
[70~180/1 deg.]
HotRoll Hot Roller
036 Wait Temp: Norm Normal standby temperature.
[50~170/1 deg.]
037 Wait Temp: Low Low standby temperature.
[50~170/1 deg.]
038 Wait Temp: High High standby temperature.
[50~170/1 deg.]