SERVICE PROGRAM TABLES
SM 5-31 B132/B200
Service Tables
1202 Set Fusing Temp Set Fusing Temperature (for shift to low power mode)
This SP sets the time interval for the machine to remain idle to trigger lower power
mode 1.
Set Fusing Temp
001 EngSave Time 1 [0~60/1 deg.]
002 EngSave Time 2
003 EngSave Time 3
Heating Roller
004 Energy Save 1
005 Energy Save 2
006 Energy Save 3
Pressure Roller
007 Energy Save 1
008 Energy Save 2
009 Energy Save 3
Hot Roller
010 Energy Save 1
011 Energy Save 2
012 Energy Save 3
1203 Fusing:I/O Fusing Input/Output
This SP adjusts the operation of the fusing exit sensor.
001 FuseExitSn:On/Off Display indicates whether the fusing exit sensor is on or off.
0: OFF 1:ON
002 FuseExitSn Timing
Displays the time interval from when the registration motor
goes off to when it restarts.
[0~5000/1 msec.]
003 FuseExitSn ON
Display indicates whether the fusing paper remains sensor is
on or off.
[0~5000/1 msec.]
004 FuseExitSn Disp
Dsiplays whether the paper remains sensor is on or off from
when the registration motor goes off until it restarts.
0: OFF 1:ON
005 FuseExit M ON Switches forced rotation of the fusing/exit motor on/off.
[0~1/1]
1901 CPM Down:Thk CPM Down Mode: Thick Paper
This SP adjusts the CPM down time for thick paper and tab sheets.
001 CPM Down:Thk Special CPM Down Setting: Thick Paper
[0~4/1]
002 CPM Down:Tab Special CPM Down Setting: Index Tabs
[0~4/1]
To Next Page
Loading...
