Ricoh B132 - Page 550

SERVICE PROGRAM TABLES
B132/B200 5-72 SM
2831 Sp2:K:LL Special Paper 2: K Low
2832 Sp2:K:ML Special Paper 2: K Medium Low
2833 Sp2:K:MM Special Paper 2: K Medium
These SPs set the paper size correction coefficient for the image to paper transfer
bias threshold values calculated based on the reading of the absolute humidity from
the temperature/humidity sensor and the thresholds set with SP2304 001.
SP2831 – Up to SP2304 001: Threshold 1
SP2832 – More than SP2304 001 Threshold 1, up to SP23204 002 Threshold 2.
SP2833 – More than SP2304 002 Threshold 2, up to SP2304 003 Threshold 3.
SP2834 – More than 2304 003 Threshold 3, up to SP2304 004 Threshold 4.
SP2835 – More than 2304 004 Threshold 4
These settings apply only to the image area printed on Special Paper 2 in black-and-
white mode.
2831 2832 2833
007 Side1:PTR [10~250/5%] [10~250/5%] [10~250/5%]
008 Side1:SepDC
009 Side1:SepAC
012 Side2:PTR
013 Side2:SepDC
014 Side2:SepAC
2834 Sp2:K:MH Special Paper 2: K Medium High
2835 Sp2:K:HH Special Paper 2: K High
2834 2835
007 Side1:PTR [10~250/5%] [10~250/5%]
008 Side1:SepDC
009 Side1:SepAC
012 Side2:PTR
013 Side2:SepDC
014 Side2:SepAC