Ricoh B132 - Page 612

SERVICE PROGRAM TABLES
B132/B200 5-134 SM
6102 Adj Punch Pos 2 Punch Position Adjustment
Adjusts the punch position perpendicular to the direction of feed.
[-20~+20/0.4 mm]
+ Value: Shifts punch unit toward back of the finisher.
- Value: Shift punch unit toward front of the finisher.
001
2-Hole:DOM
002
3-Hole:NA
003
4-Hole:EU
004
4-Hole:SCAN
005
2-Hole:NA
Paper Feed
B132S922.WMF
6103 Punch Hole Reg 1 Punch Hole Registration Adjustment
This SP corrects punch hole alignment by correcting the skew of each by adjusting
the amount of time the finisher entrance roller remains off while the exit roller of the
machine remains on. This buckles the leading edge of the sheet slightly against the
finisher entrance roller while it remains off.
001
A3 SEF
[-500~+500/0.3 mm]
002
B4 SEF
+ Value:Increases time finisher entrance roller remains off.
003
A4 SEF
- Value: Descreases time finisher entrance roller remains off.
004
A4 LEF
005
B5 SEF
006
B5 LEF
007 DLT SEF
008
LG SEF
009 LT SEF
010 LT LEF
011
12" x 18"
012 Custom Size