SERVICE PROGRAM TABLES
SM 5-145 B132/B200
Service Tables
7504 Paper Jam Loc Paper Jam Locations – 3000-Sheet Finisher B700
Displays the list of possible locations where a jam could have occurred. Press the
appropriate key to display the jam count for that location. These jams are caused by
the failure of a sensor to activate.
On Operation Panel Actual Component Name
191 Entrance Sn Entrance Sensor
192 Stapler Exit Stapler Exit Sensor
193 Shift Exit Sn Shift Exit Sensor
194 Stapler Exit Stapler Exit Sensor
195 Belt Feed Out Belt Feed Out
196 Corner Staple Corner Stapling
197 Saddle Stapling Saddle Stapling
198 Paper Folding Paper Folding
199 Shift Tray Motor Shift Tray Motor
200 Jogger Fence Motor Jogger Fence Motor
201 Shift Roller Motor Shift Roller Motor
202 Stapler Shift M Stapler Shift Motor
203 Stapling Motor Stapling Motor
204 Paper Folding Paper Folding
205 Feed Out Belt Motor Feed Out Belt Motor
206 Paper Punch Motor Paper Punch Motor
7504 Paper Jam Loc Paper Jam Locations – Z-Folding Unit B660 (Japan Only)
Displays the list of possible locations where a jam could have occurred. Press the
appropriate key to display the jam count for that location. These jams are caused by
the failure of a sensor to activate.
On Operation Panel Actual Component Name
211 Paper Feed:Late Paper Feed Sensor: Late
212 Paper Feed:Lag Paper Feed Sensor: Lag
213 Fold Timing Sn:Late Fold Timing Sensor: Late
214 Fold Timing Sn:Lag Fold Timing Sensor: Lag
215 Lead Edge Sn:Late Leading Edge Sensoor:Late
216 Lead Edge Sn:Lag Leading Edge Sensor:Lag
217 Up Stopper Sn:Late Upper Stopper Path Sensor:Late
218 Up Stopper Sn:Lag Upper Stopper Path Sensor:Lag
219 Lower Ex Sn:Late Lower Exit Sensor:Late
220 Lower Ex Sn1:Lag Lower Exit Sensor:Lag
223 Up Ex Sn:Late Upper Exit Sensor:Late
224 Up Ex Sn:Lag Upper Exit Sensor:Lag
225 Paper Fold M Paper Fold Motor
226 Lower Stopper M Lower Stopper Motor Lock
227 Upper Stopper M Upper Stopper Motor Lock
To Next Page
Loading...
