PAPER FEED
B132/B200 6-124 SM
By-pass Paper Size Detection
Paper Width
When the front fence [A] and rear fence [B] are moved to the sides of the paper in
the bypass tray:
• The metal actuator [C] moves to a position on the sensor strip [D].
• The machine reads the position of the actuator on the strip to determine the
paper size.
Paper Length
Paper length is determined with pulse counts read from the registration sensor.
NOTE: Use SP1007 to check the size of the paper detected in the by-pass tray if
paper is skewing during feeding.
B132D602.WMF
[A]
[B]
[C]
[D]
To Next Page
Loading...
