OVERALL MECHANICAL INFORMATION
B834 38 SM
Sensors
No. Name Description
lift motor off.
S35 6th Paper End Sensor Detects when the last sheet feeds from the 6th
tray.
S36 6th Paper Feed Sensor Detects the paper when it arrives at the 6th paper
feed roller and checks for misfeeds.
S37 6th Paper Height Sensor 1 4th from the bottom of the 6th tray, detects stack
height: 100%
S38 6th Paper Height Sensor 2 5th from the bottom of the 6th tray, detects stack
height: 75%
S39 6th Paper Height Sensor 3 6th from the bottom of the 6th tray, detects stack
height: 50%
S40 6th Paper Height Sensor 4 4th from the bottom of the 6th tray, detects stack
height: 25% and signals near-end.
S41 6th Paper Length Sensor (B834) Detects the length of the paper in the 6th tray
(used in combination with the paper width
sensors).
S42 6th Paper Width Sensor 1 (B834) 1 of a set of 3 sensors that detect the width of the
paper in the 6th tray.
S43 6th Paper Width Sensor 2 (B834) 1 of a set of 3 sensors that detect the width of the
paper in the 6th tray.
S44 6th Paper Width Sensor 3 (B834) 1 of a set of 3 sensors that detect the width of the
paper in the 6th tray.
S45 6th Paper Size Sensor 1 (B832) 1 of a set of 3 sensors that detect the width of the
paper in the 6th tray.
S46 6th Paper Size Sensor 2 (B832) 1 of a set of 3 sensors that detect the width of the
paper in the 6th tray.
S47 6th Paper Size Sensor 3 (B832) 1 of a set of 3 sensors that detect the width of the
paper in the 6th tray.
S48 6th
Relay Sensor (B834) Detects the leading and trailing edges of the paper
in the paper path near the 6th tray. Checks the
timing of the feed and signals a jam if the paper is
late or lags at this location.
S49 6th Transport Sensor Detects jams in the paper path where the
transport motor feeds the paper from the 6th tray.
S50 LCT Exit Sensor Detects jams at the exit of the LCT unit.
S51 LCT Image Position Sensor Mounted on the CRB (CIS Relay Board), this
contact image sensor detects the side-to-side
edges of the paper in the paper path. The
machine uses this information to correct the
position of the image when the lasers fire.
To Next Page
Loading...
