4
1. INTRODUCTION
1.1 INTRODUCTION
Thank you for purchasing the StreamPunch. It is a versatile production system
that will enable you to punch documents for a variety of binding styles with a
simple die change. It has also been designed for easy operation.
The StreamPunch is an innovative solution for punching paper and offers the
following design features:
• Quick-change die sets that are self-latching without tools or levers.
• All StreamPunch die sets include an Identifying Label providing user with the
hole pattern and name.
• Convenient storage area for three extra Die Sets located above the sheet
bypass.
• Convenient LED’s indicate:
• PAPER JAM: Indicates there is a paper jam.
• CHIP TRAY FULL/OUT: Indicates the chip tray should be emptied, is missing
or improperly installed.
• PUNCH ENABLED: Indicates the system is in the punch mode.
• CHECK DIE SET: Indicates a Die Set is not installed properly.
• CLOSE DOOR: Indicates the access door is not properly closed.
• POWER: Indicates the machine is plugged in, the POWER is on.
These instructions have been prepared to acquaint you with the StreamPunch
punch and its operation. Please read them carefully. Keep this complete
operating instruction for future reference.
To Next Page
Loading...
