FINISHER DOCKING BRACKET INSTALLATION
The docking brackets are shipped in a
separate bag to avoid shipping damage.
Install as shown with the bracket marked “R”
on the right side facing you as you look at
the exit side of the StreamPunch. Install the
bracket marked “L” on the left side facing
you. Both brackets should be oriented with
the arrow facing up.
SOUND DEADENING FOAM STRIPS
Supplied with the StreamPunch you will find six
strips of sound deadening foam are shipped loose
for field installation. These are not attached at the
factory to avoid compression and/or damage
during shipping.
To install, simply peal the back off to reveal the
adhesive using the following steps as a reference.
To Next Page
Loading...
