ALIGN
& FIX SCREWS
Step 15: To install the Paper Guide Assembly into the StreamPunch.
PAPER EXIT
SIDE
FRONT DOOR
D
SIDE
SIDE
PAPER ENTERANCE
ASSEMBLE BACK
A. As you slide the Paper Guide Assembly into place,
a. Hook up the Sensor Harness to the Sensor on the back.
b. Lift it up slightly to clear the lower Transition Paper Guide.
c. Be sure to clear the Sensor Bracket at the top left.
d. Be sure that the Flex Coupling Shaft is sticking out of the rear of the
StreamPunch properly.
B. Visually check all around the mounting area of the Paper Guide Assembly and that
the Sensor Harness is properly connected.
To Next Page
Loading...
