SKEW AND SIDE-TO-SIDE ADJUSTMENT
B234/B235/B236/D101/D102/D103 1-118 SM
If you are doing this adjustment on the side of the Z-Folding unit:
• At the base of the unit, loosen screws [A] and [B].
• Slide the plate left or right.
• Move the plate on the scales [C] and [D] by the same amount as the
adjustment done above on the long bracket.
• Retighten the screws.
4. Do some more test prints and repeat the adjustment until it is correct.
B660I004B.WMF
[A]
[B]
[C]
[D]
To Next Page
Loading...
