INSTALLATION OF MFP CONTROLLER OPTIONS
B234/B235/B236/D101/D102/D103 1-144 SM
5. Set SP5836 003 to “1” to enable the print backup feature.
6. Confirm or set the following SP codes with the values in the table listed below.
SP No. Setting SP No. Setting
SP5-836 001 1 SP5-836 073 0
SP5-836 002 0 SP5-836 085 1
SP5-836 003 1 SP5-836 086 2
SP5-836 072 0 SP5-836 091 50
7. Set the following SP codes according to the customer’s needs.
SP No. Setting Comment
SP5-836 094 2
Selects JPEG2000 file format for documents copied from
the document server to Palm2.
Note: Files backed up to Palm2 in J2K format cannot be
edited by other software applications.
0
Selects the TIFF file format for documents copied from the
document server to Palm2.
Note: Select this so the backed up files can be used with
other software applications (editing, OCR, etc.) with only
slight loss in image quality.
SP-5836 098 1
Applies dot correction and eliminates ghost images
transferred from the back sides of double-sided originals
when files are copied to Palm2. This selection also reduces
the size of the file.
Note: This function is applied to both J2K and TIFF files
and is particularly useful for copying large J2K documents
quickly with only a slight loss in image quality.
0
Does not apply the features of the “1” setting when files are
copied to Palm2.
Note: This setting preserves the quality of the original
image, especially with J2K files, but also requires more time
for copying and requires more disk space to store the larger
files.
To Next Page
Loading...
