Service Program Mode Operation
SM 5-5 B234/B235/B236/D101/D102/D103
Service
Tables
User, Super User SP Mode
The new user and super user SP modes allow everyday users and trained users
(super users) to adjust the machine operation for variable conditions such as paper
type, changes in temperature and humidity around the machine, the effects of wear
on machine parts over time, and so on.
There are two types of users:
• Users: Individuals who use the machine every day for copying and printing and
are familiar with the operation of the machine.
• Super Users: Individuals who also use the machine for copying and printing.
However, super users are also trained in basic replacement procedures for key
components such as the development unit, charge corona unit, and so on. All the
replacement procedures in the TCRU (Trained Customer Replacement Unit)
manual require opening the Super User Program Mode tables and doing
important adjustments after a component is replaced.
Access to the Super User Program Mode tables is restricted:
• A "Super User" is assigned an access code that allows access to all the features
in the Super User Program Mode service tables.
• A user is not assigned an access code, but he or she can use the User Program
Mode.
Most of the User/Super User SP codes duplicate the functions of the SP codes in
the main service tables. The table below is a list of the "Engine SP" codes in the
main service tables that have equivalent SP codes in the User/Super User SP
service tables.
Engine SP
Engine SP Name
User SP
User SP Name User Super
1001
Leading Edge
Registration
1710
Shift Image With Feed O O
1002
Side-to-Side Registration
1720
Shift Image Across Feed O O
1003
Paper Buckle Adjustment
1730
Adjust Paper Skew X O
1005
Fusing Temperature
Adjustment
1740 16
Set Fusing Temperature X O
1902 1
Web Motor Control
1750
Initialize Unit X O
---
2710
Adjust Image Density X O
3902
Process Control Data
Display
001
Step 1 X O
2201
Development Bias
Adjustment
002
Step 2 X O
2207 2
Toner Supply
003
Step 3 X O
---
2720
Adjust Image Quality X O
2301 1
Transfer Current
Adjustment – 1st Side
001
Front X O
2301 5
Transfer Current
Adjustment – 2nd Sice
002
Back X O
---
Charge Corona Cleaner
On
003
Reduce Halftone X O
None
004
No White Spots X O
---
2730
Set Unit Default X O
2801 1, 2207
2
TD Sensor Initial Setting
001
Development X O
To Next Page
Loading...
