Ricoh B234 - Page 551

Main Service Program Mode Tables
SM 5-13 B234/B235/B236/D101/D102/D103
Service
Tables
1903 Web Drive Time
001 Web Total Time Display (x 200ms)
Displays the total amount of time (seconds) elapsed during web roll feed.
002 Web Actual Time Display (x 100ms)
Displays the total amount of web roll motor operation time (seconds) for feeding the
current web roll.
1909 CIS Image Position Adj: PWM Duty After Adj
Displays the results of the settings done with SP1910.
001 Tray 1, 2, 3
002 LCT
003 Duplex
1910 CIS Image Pos Adj: LED Strength
Press [Execute] to do the adjustment.
Note:
• For more about adjustment of the CIS components in the copier, see Section "3.
Replacement and Adjustment".
• The CIS of the LCT should be adjusted at installation. For more see Section "1.
Installation".
001 Tray 1, 2, 3
002 LCT
003 Duplex
Press [Execute].
1912 CIS Image Pos Adj: Normal Paper
There are three image position sensors units (1 in the LCT and 2 in the copier). Each
image position sensor unit contains a CIS. Each CIS can be adjusted independently
for normal paper.
Note:
• For more about adjustment of the CIS components in the copier, see Section "3.
Replacement and Adjustment".
• The CIS of the LCT should be adjusted at installation. For more see Section "1.
Installation".
001 Tray 1, 2, 3
002 LCT
003 Duplex