Ricoh B234 - Sp6-Nnn Peripherals

Main Service Program Mode Tables
SM 5-91 B234/B235/B236/D101/D102/D103
Service
Tables
SP6-nnn Peripherals
6006 DF Registration Adjustment
001 Side-to-Side
Adjusts the printing side-to-side registration in the ADF mode.
[-3~+3 / 0 / 0.1 mm]
Use the “
• /*” key to toggle between + and –.
003 Leading Edge (Thin Original)
Adjusts the original stop position.
[-10~+10 / 0 / 0.13 mm]
Use the “
• /*” key to toggle between + and –.
005 Leading Edge (Duplex 1st)
Adjusts the original stop position against the original left scale in one-sided original
mode, and the first side of duplex originals.
[-29~+29 / 0 / 0.13 mm]
Use the “
• ” key to toggle between + and –.
006 Leading Edge (Duplex-2nd)
Adjusts the original stop position against the original left scale for the second side of
duplex originals.
[-29~+29 / 0 / 0.13 mm]
Use the “
• ” key to toggle between + and –.
6007 ADF Input Check (5.4.2)
001 Group 1
Displays the signals received from sensors and switches of the ADF.
002 Group 2
Displays the signals received from sensors and switches of the ADF.
003 Group 3
Displays the signals received from sensors and switches of the ADF.
6008 ADF Output Check
Turns on the ADF electrical components individually for testing. (5.5.2)
6009 DF Free Run
Performs an ADF free run in two-sided original mode. Press “1” to start.
This is a general free run controlled from the copier
6019 ADF Motor Speed Auto Adjustment
After pressing the Start key, the machine automatically adjusts the speeds of the
ADF motors in the following order:
Feed-in motor → Transport Motor → Feed-out Motor (High) → Feed-out Motor
(Low)