PM Counter
SM 5-191 B234/B235/B236/D101/D102/D103
Service
Tables
If one of the keys in the “No” column is pressed, the following appears on the
display.
On this screen, the records of the last three part replacements are displayed. When
‘Clear current counter’ is pressed, the current counter is cleared, the current
counter is overwritten to “Latest 1”, the Latest 1 counter is overwritten to “Latest 2”,
and the Latest 2 counter is overwritten to “Latest 3”.
Additionally, the target yield can be changed on this screen. To change the target
yield setting, do the following:
1) Press [Change target yield] on the screen.
2) Input the target yield using the ten-key pad.
3) Press the # key.
A294M017.PCX
To Next Page
Loading...
